Product Details

  • Home /
  • Product Details

ATV31C037N4 |Schneider | enclosed variable speed drive ATV31 - 0.37kW - 500V - IP55

427.00 RM 1767.1
SKU:ATV31C037N4
Estimated Lead Time : 6 - 8 weeks.
Category: Inverters/Schneider
Manufacturer:Schneider

Product Description

  • Estimated Lead Time: 3-4 Weeks

  • Manufacturer: Schneider

  • ATV31C037N4

  • enclosed variable speed drive ATV31 - 0.37kW - 500V - IP55

  • Range of product : Altivar 31

  • Product or component type : Variable speed drive

  • Product specific application : Simple machine

  • Component name : ATV31

  • Assembly style : Enclosed

  • EMC filter : Integrated

  • [Us] rated supply voltage : 380...500 V - 15...10 %

  • Supply frequency : 50...60 Hz - 5...5 %

  • Network number of phases : 3 phases

  • Motor power kW : 0.37 kW

  • Motor power hp : 0.5 hp

  • Line current : 1.7 A 500 V 1 kA
    2.2 A 380 V 1 kA

  • Apparent power : 1.5 kVA

  • Prospective line Isc : 5 kA

  • Maximum transient current : 2.3 A 60 s

  • Power dissipation in W : 32 W at nominal load

  • Asynchronous motor control profile : Factory set : constant torque
    Sensorless flux vector control with PWM type motor control signal

  • Complementary

  • Product destination : Asynchronous motors

  • Supply voltage limits : 323...550 V

  • Network frequency limits : 47.5...63 Hz

  • Speed drive output frequency : 0.5...500 Hz

  • Nominal switching frequency : 4 kHz

  • Switching frequency : 2...16 kHz adjustable

  • Transient overtorque : 150...170 % of nominal motor torque

  • Braking torque : 100 % without braking resistor
    100 % with braking resistor continuously
    150 % with braking resistor 60 s

  • Regulation loop : Frequency PI regulator

  • Motor slip compensation : Adjustable
    Automatic whatever the load
    Suppressable

  • Output voltage : <= power supply voltage

  • Electrical connection : Terminal 2.5 mm? AWG 14 Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
    Terminal 2.5 mm? AWG 14 L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-

  • Tightening torque : 0.6 N.m Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6
    0.8 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-

  • Insulation : Electrical between power and control

  • Supply : Internal supply for logic inputs 19...30 V > 0...0.1 A short-circuit protection
    Internal supply for logic inputs 19...30 V > 0...0.1 A overload protection
    Internal supply for reference potentiometer 10...10.8 V > 0...0.01 A short-circuit protection
    Internal supply for reference potentiometer 10...10.8 V > 0...0.01 A overload protection

  • Analogue input number : 3

  • Analogue input type : Configurable current AI3 0...20 mA 250 Ohm
    Configurable voltage AI1 0...10 V 30 V max 30000 Ohm
    Configurable voltage AI2 +/- 10 V 30 V max 30000 Ohm

  • Sampling duration : 4 ms LI1...LI6 discrete
    8 ms AI1, AI2, AI3 analog

  • Response time : 8 ms discrete R1A, R1B, R1C, R2A, R2B
    8 ms analog AOV, AOC

  • Linearity error : +/- 0.2 % output

  • Analogue output number : 2

  • Analogue output type : Configurable current AOC 0...20 mA 800 Ohm 8 bits
    Configurable voltage AOV 0...10 V 470 Ohm 8 bits

  • Discrete input logic : Logic input not wired LI1...LI4 < 13 V
    Negative logic (source) LI1...LI6 > 19 V
    Positive logic (source) LI1...LI6 < 5 V > 11 V

  • Discrete output number : 2

  • Discrete output type : Configurable relay logic R1A, R1B, R1C 1 NO + 1 NC 100000 cycles
    Configurable relay logic R2A, R2B NC 100000 cycles

  • Minimum switching current : 10 mA 5 V DC R1-R2

  • Maximum switching current : 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms R1-R2
    2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms R1-R2
    5 A 250 V AC resistive cos phi = 1 L/R = 0 ms R1-R2
    5 A 30 V DC resistive cos phi = 1 L/R = 0 ms R1-R2

  • Discrete input number : 6

  • Discrete input type : Programmable LI1...LI6 24 V 0...100 mA PLC 3500 Ohm

  • Acceleration and deceleration ramps : S, U or customized
    Linear adjustable separately from 0.1 to 999.9 s

  • Braking to standstill : By DC injection

  • Protection type : Input phase breaks drive
    Line supply overvoltage and undervoltage safety circuits drive
    Line supply phase loss safety function, for three phases supply drive
    Motor phase breaks drive
    Overcurrent between output phases and earth (on power up only) drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor

  • Insulation resistance : 500 MOhm 500 V DC for 1 minute

  • Time constant : 5 ms for reference change

  • Frequency resolution : 0.1...100 Hz analog input
    0.1 Hz display unit

  • Type of connector : 1 RJ45 Modbus
    1 RJ45 CANopen via VW3 CANTAP2 adaptor

  • Physical interface : RS485 multidrop serial link Modbus

  • Transmission frame : RTU Modbus

  • Transmission rate : 10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen via VW3 CANTAP2 adaptor
    4800, 9600 or 19200 bps Modbus

  • Number of addresses : 1...127 CANopen via VW3 CANTAP2 adaptor
    1...247 Modbus

  • Number of drive : 31 Modbus
    127 CANopen via VW3 CANTAP2 adaptor

  • Marking : CE

  • Operating position : Vertical +/- 10 degree

  • Product weight : 8.8 kg

  • Environment

  • Dielectric strength : 2410 V DC between earth and power terminals
    3400 V AC between control and power terminals

  • Electromagnetic compatibility : 1.2/50 s - 8/20 s surge immunity test level 3 IEC 61000-4-5
    Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
    Electrostatic discharge immunity test level 3 IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3

  • Standards : EN 50178

  • Product certifications : C-Tick
    CSA
    N998
    UL

  • IP degree of protection : IP55

  • Pollution degree : 2

  • Protective treatment : TC

  • Vibration resistance : 1 gn 13...150 Hz EN/IEC 60068-2-6
    1.5 mm 3...13 Hz EN/IEC 60068-2-6

  • Shock resistance : 15 gn 11 ms EN/IEC 60068-2-27

  • Relative humidity : 5...95 % without condensation IEC 60068-2-3
    5...95 % without dripping water IEC 60068-2-3

  • Ambient air temperature for storage : -25...70 C

  • Ambient air temperature for operation : -10...50 C without derating with protective cover on top of the drive
    -10...60 C with derating factor without protective cover on top of the drive

  • Operating altitude : 1000 m with current derating 1 % per 100 m
    Without derating

  • RoHS EUR conformity date : 2Q2009

  • RoHS EUR status : Will be compliant

  • Shipping Weight : 9.8 Kg

Weight 9.8 kg
Dimensions 16 x 22 x 123 cm

    • 5.00
    • Tom Joe – Mar 15, 2015:
    • 4.00
    • Mark Doe – Jan 23, 2015: